Summary

dinghy bung
half turn

nothing worse then going to the dinghy park to find some one has taken the bungs of your boat.

Instructions

the socket needs scaling to allow clearance for a smooth fit, for my setup i scaled up the socket 1.04%
those of you with better machines may not need to!

printed and tested working in pla
the bung itself is in half as you need both faces as smooth as the printer can manage, super glue is sufficient to connect the two halfs.

layer hight: 0.1
shell thickness: 1.2
top/bottom: 1.2
fill density: 20% or more (update 20% is insufficient for some 100% best)
print speed: 50
extruder: 190
bed: 45
support: N/A
platform adhesion: N/A