Summary

Attention: You have to know, what you are doing, when you try to repair an electric device. There is the risk of a fatal electric shock. In either case unplug the device first!

The switch of our electric kettle (by Tefal) broke. I took a look and it seemed, that the lid above the switch could be removed. It worked and I removed the broken switch, measured it, drew it printed it ...
The kettle is working again :)

Print Settings

Rafts:

Yes

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Needs Support. Mine removed quite well. The parts with support are predominatly hidden by the lid after reassembling. So they have not to be cleaned too well.</p></div>

Post-Printing

If you try to disassemble the device, you will find clips at the bottom. Use a screwdriver or something similar as a crank and bend them up carefuly.The bottom will be loose then. At the top, the lid is clued I think. So it broke, when I tore it off. But the lid slips under top cover and it seems, this fits tight enough without gluing, when I reassembled everything.

electric kettle switch