Summary

This is the medallion Lucian wears in the Underworld movies.

EDIT - I've included a Sketchup file of half of the Medallion in case anyone wants to tinker with it. It's not to scale, but the real prop was about 34mm in diameter. Feel free to make your own adjustments.

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>As fine as you can</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Your discretion</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I split the design along the diagonal so it can print without supports. The loops are separate, which should make it easy to attach a chain if you require. They will need to be attached in the centre of the edges as illustrated in the supplied photo. </p></div>

Post-Printing

It looks a lot better if you smooth the surface somehow. In my example I used acetone vapour but self levelling resin is just as good provided you use it sparingly.

I sprayed the piece gold. Once that was dry I used an old brush to push burnt umber paint into all the nooks and crannies then wiped as much as I could back off again while it was still wet. The finishing touch was a green faux gem stuck in the centre.

Underworld - Lucian's Medallion