Summary

This Halloween, print Frankenstein's Monster. Remixed from our original model, he now has updated bolts, stitches, and a removable brain! You can even use his head as a chip bowl for your Halloween party.

Original single print model here: http://www.thingiverse.com/thing:1057510

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>250</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>8</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Make sure to cut off the bottom in your slicer to ensure a flat bottom. Make sure to print with some support to guarantee bolts do not droop. Also make sure your model has at least 8% infill or more to guarantee there are no holes in the top.</p><p>Head</p><p>Printed on a Type A Machines 2014 Series 1 3D Printer<br>Printed with Natural Clear PLA from 3D Solutech<br>Printed with support, 81 degree overhang angle<br>Printed with a brim, 20 lines<br>250 microns (0.25 mm layer height)<br>305 mm Height (12 inches)<br>40h Print Time<br>0.8 mm Shell Thickness<br>7% Fill Density<br>80 mm/s Print Speed<br>0.4 mm Z hop when retracting<br>265.73 m of filament used<br>230C Print Temperature</p><p>Brain</p><p>Printed on a Type A Machines 2014 Series 1 3D Printer<br>Printed with Natural Clear PLA from 3D Solutech<br>Printed with support, 55 degree overhang angle<br>Printed with a brim, 20 lines<br>250 microns (0.25 mm layer height)<br>140 mm Height (5.5 inches)<br>20h Print Time<br>0.8 mm Shell Thickness<br>8% Fill Density<br>80 mm/s Print Speed<br>0.4 mm Z hop when retracting<br>140.26 m of filament used<br>230C Print Temperature</p><p>Sliced with Cura<br>Modeled with Z Brush</p></div>

Frankenstein's Monster with Removable Brain