Summary

tank cars in scale H0.
The idea of this wagon is to get a nice little tank car on the tracks.
For a very low cost per wagon.
Print Settings

Rafts:
No
                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Normal 0,2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>printed in ABS . PLA will of course also work<br>I like the ABS because it is glued so easy with acetone</p><p>wheel axle mounting, depending on which wheels are used.<br>The wheels of the axle is pressed lightly in the wheel axle holder,<br>You should try things out.<br>I have used 2mm silver steel shafts. but you can use what you have at<br>home in the junk box. As long as the diameter is around 2 mm.</p><p>The wheels are printed with 0.1mm layer and low speed<br>To get a smooth run on the wheels, i turned it lightly on the wheel surface.<br>it is also possible to put a wheel on a drill and a file smooth surface.if needed</p><p>Parts belonging to the cistern is glued. Cistern glued or screwed to the cart. couplers is attached with a screw<br>Petrol company logos. These have I written out with laser printers. and glued on<br>Some drilling may be required for the wheels axle hole. and the chassis for the buffers</p></div>
Post-Printing

H0 tank car
