Display Stand for HDMIPi

-Display Stand for HDMIPi.

This was designed for HDMIPi.
"Simple Stand" and "Stand with Stereo Speakers" are available.

-Simple plan
Component parts are "Stand", "Fastening-Pins" and "tray" only.
stand_031.stl
pin_031.stl
tray_031.stl
"Stand" part may be too large to print for some compact 3D-Printers.

-Optional; Stereo Speakers plan
On the HDMi Driver Board, "speaker out" connector is existed.
Audio output lines of MC6019[Stereo Audio Power Amplifier IC, ?same as "EUA6019"? ] are connected to it.
This plan will be realized, if the printed pieces're assembled and a speakers're connected to that connector.
(2 Speakers & wire, "PHR-4" Connector housing & contacts and M3 Bolts & Nuts are required.)

Components are following 5 parts.
stand_spk_031.stl
pin_031.stl
tray_031.stl
cover_spk_031.stl
spacer_spk_031.stl
.
I made this thing with 2W 8ohm miniature speakers and 8 pairs of 15mm long M3 Bols&Nuts.
There are many another choices of Speakers.
Please re-make or re-design to fit for your choiced speakers.
AUTODESK 123D DESIGN CAD file is "HDMIPi_Stand_031.123dx"
.
Perhaps, above mentioned matter may be wrong or something will be changed.
Please verify the connector shape, pin assigns and specification of Audio Amp IC.