Summary

This is a holder for 1oz silver bullion bars.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8jGy8McUuhu

Print Settings

Printer:

Da Vinci 1.0 (modified)

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.4mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>12%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Works fine with just about any layer height. It's utilitarian, so I use 0.4mm to save time. </p><p>Infill should be at least 10% for strength. I find 12% - 15% to be a great tradeoff between strength and speed. Rectilinear infill seems to end up making the top layers look better compared with honeycomb, unless you're going with really dense infill. </p><p>I used Simplfy3D to slice and print. It destroys all other 3D printing software.</p></div>

How I Designed This

I simply used a caliper to measure the silver bars I had and modeled the holder in Tinkercad.

1 oz Bar Holder (Bullion)