Summary

This is a holder for 1oz silver bullion rounds (coins). It holds 16 rounds, depending on thickness. There is some variation between brands, so some brands may only fit 15. I have also seen a few brands that are slightly wider than 39mm, so they may be a very tight fit.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4OUJ8SKSnh3

Print Settings

Printer:

Da Vinci 1.0 (modified)

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>any</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>at least 10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Honeycomb or rectilinear infill both work fine, and I've gone as low as 8% with honeycomb, but I would recommend 10% or more.</p><p>Layer height is not much of a factor, so save some time and print thick.</p></div>

1oz Silver Round Holder (39mm)