Summary

I want to see how my Deltaprintr is running so this test print.....
The file is for 250mm diam and thickness of 0.25mm, but in Cura, I scaled it by 0.8 to give 200mm diam. That turned out to be a good idea because the fan just cleared a pillar!
When it is finished, a micrometer can be used to measure the thickness in various places, and the diameter can be checked too.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4koa9nveXSy

Print Settings

Printer Brand:

Deltaprintr

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Deltaprintr Kit</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed at 20mm/sec using PolyMax PLA.<br>There is a thin area on the right side of 0.23mm while the thickest part is 0.32mm. One area that did not stick so well to the mirror is thicker at 0.44mm but I think that is an artifact of the print failure.</p></div>

Testprint_01