Clone Wars assassin rifle

Update Rebuilt the handle more clone wars weapon style and gave it some flair cut up version will be posted and I may even print and assemble one. Let me know if you have any issues with the size.

A long rifle made for a friend of mine. Model is to scale so 3d printing without a lot of slicing would be near impossible as it's over 4 feet in length. The character that the rifle belongs to was from the animated star wars tv show but only appears in one episode.
Despite all that I made it anyway as they wanted to make the costume.

Due to this model's size I recommend using Pepakura to print.

Barrel Length exposed is 542.5MM x 17MM This should likely be done with a piece of pipe.

The slicer is 125MM by 30MM. I recommend using pipe then filling in the gap between the barrel cutting the main barrel 760MM+ this will give you the barrel length to allow for the pipe to go in both sides of the model. A metal rod may be needed for stability.

The lower pipe is 189.7MM Long this includes a depth of about 1/3 into the rifle for stability.

Back stock extension pipe should be cut around 124 long this does include inserting stability length and should be cut much longer. Exposed region should be only 66.5MM x 32.9MM Note there is a ring on the end of this exposed pipe to allow for some play when connecting to the shoulder rest.

Forward end of the stock pipe is 50MM long by 16.8MM wide
Using this you should be able to create a model in pepakura. But as stated both the full STL and a 123d are provided.