Cut up Frostmourne

I wanted a full scale model, but my print bed isn't nearly big enough. Hooray for Puzzlecut!

The cuts aren't NEARLY that large; I set them to -0.4 to illustrate the cut locations. In the .scad and .stl file they're set to -0.01, but that's of course configurable. I found -0.05 to be a bit loose for friction welding.

I included HotCheeseSoup's Frostmourne.stl file. If you intend on editing the scad file, you'll need to edit the path/to/frostmourne string at the top.

Further, the model's REALLY small. You'll want to scale appropriately. 10x results in a ~1.4m sword.

Update: 3/14/2016

I've finally gotten around to uploading the .stls I used for anyone that doesn't want to go to the trouble of breaking the piece apart themselves. The pommel is...difficult. You'll want to print both parts together, on their flat side, and then join them while they're still warm from the bed.

Update: 9/25/2016
Just uploaded the files I used to print the model, individually. Thanks to user S****h for encouraging me :)

tags: sword knife openscad world_of_warcraft wow