Summary

This is a demonstration piece to show printing onto fabric. Inspired by http://cubify.com/store/fabricate . Once printed the piece can be sewn onto a garment.

Print Settings

Rafts:

Doesn't Matter

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>

Fabric printing technique

Additional material

            <div><p>Mesh fabric</p></div>                <p class="detail-title"><strong>Overview</strong></p>            <div><p>The basic idea is to sandwich the fabric in between layers of the print. The holes in the mesh mean the the plastic sticks to the plastic below and the model will stick firmly to the fabric. If you try printing directly onto the fabric the plastic not stick very well.</p></div>                <p class="detail-title"><strong>Instructions</strong></p>            <div><ul><li>Start the print. </li><li>Pause the print after the first layer or two. Most printers will allow you to do this. On a Makerbot use the "Change filament" option from the menu, this pauses the print and moves the print head out of the way.</li><li>Lay the mesh smoothly over the print. Use tape or clips to hold the edges down.</li><li>Resume the print.</li></ul><p>Let it finish and you are ready to start sewing.</p></div>

Fabric spiral