Summary

These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would upgrade the keys from the cardboard chits to 3d objects. My wife drew the 3 level STL this came from and then I made the 3d file from that.

Print Settings

Printer Brand:

LulzBot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Mini</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The first layer of this is really thin, so I would pay attention to your setting for initial layer height.  I have mine set to 0.3mm for this so that way it gets a few passes before moving up.</p></div>

Post-Printing

I printed this with ABS and used ABS slurry to glue them together so I was not really that concerned with possible holes in the print on the first layer. The slurry would get into it and fill them.

I am going to spraypaint them silver, I think they will look very nice once I do that. I am also considering acetone smoothing as an experiment.

Upgrade keys for Abyss boardgame