Summary

A friend of mine at work needed a Kinect TV Mount; I wanted it to be snug so I added a gripping mechanism that is spring loaded. If I get a few request I will add adjustments for a wii sensor and a playstation eye to mount as well. Thanks Please like it if you make it! So I know if other people are using it.

Instructions

I printed out the base, which I had to flip upsided down because the STL is designed funny. After which I printed the two arms in one print.
Using .20 mm layers and 20% in-fill.

Assembly is easy; clean off support material

the scissor arms slide inbetween each other and then slide the bolt through the top of the mount down through the scissor arms and fasten the bolt. Next attach a small spring to the two arms using a paper clip or small screw. I used screws but they where randomly selected. The holes are around .125 mm

It requires at least a 2 inche #4 bolt and nut, two small screws or wire to fasten the spring.. And a 1.8 inche spring. you could use a shorter one for more tension.

Kinect Scissor Grip TV Mount