CONCEPT OF A DESIGN OF A POWER PLANT PRODUCTION USING SEA WAVES

Aware of the need for electricity in the world, I decided to make my contribution, atravéz the suggestion of a project using the motion of ocean waves.
Trough of research on the subject, I discovered that there is sophisticated technologies that are already in operation, producing energy through the movement of the waves, and even sea currents.
I did the design concepts using simple system of a water wheel, which among other uses is also used to produce electricity.
Naturally, the motion is very different from sea waves with the stream of a river, which is stable only in one direction, while at sea, the water moves in two directions, beyond which there is considerable unevenness in the level of sea ​​as a consequence of the movement of the waves.
For it to be possible to apply this principle of force of water moving propeller that produce energy in ocean waves, had to make some adadaptações as a floating base, and on it the entire installation of the propeller directly connected to the generator.
This floating base finds itself supported by four pillars, firmly rooted in the seabed. These four pillars protrude beyond the water level, and in them the floating base moves freely up and down as the wave motion of the sea.
To drive the propeller, which is about five feet long and two feet in diameter, which is connected to two generators at both ends, the sea water enters a channel of eighty centimentros high. The entrance of this channel has a funnel-shaped opening of 45 degrees. This is where the water is funneled into the channel where the propeller.
The propeller finds itself supported slightly above the center of the channel, so that the water reaches the middle thereof, and rotates thereby.
The housing which surrounds the entire system with a rounded shape in an elliptical shape to facilitate the flow of water passing underneath, and thereby elevating the whole also completely seals the interior so that water passes through the channel where only finds the propeller installed in the middle of the set. This sealing occurs against the opening 45 degrees with the housing, on both sides, because both the front and back of the casing opening is the same.
In this opening, there is formed a grid protection atravéz openings in the housing of the assembly itself to prevent elements pass through this opening, such as fish of a certain size, or debris, which could halt the propeller.
Access to the interior of the system is by a door located on the side of the housing, which should naturally be at a safe distance from the sea level. For interior lighting, you can install skylights in the ceiling.
The system works by both the water inlet of the waves passing through the channel by the propeller as well as the output side, since the return flow of the water from this water and this passes in the opposite direction and accordingly drives the propeller . For that reason they, the generator should work for rotation in both directions, clockwise and counterclockwise.
To complete, on top of the pillars, there is a set of beams that bind, and also support a mast that has luminaire that aims to illuminate around at night, and also a flag to identify its presence in the sea at night.
In the case of exposure to an idea, demonstrated and made freely atravéz drawings, any kind of calculation has been done, since I do not have this qualification.
Would be interesting if this project were analyzed by technicians to see the feasibility of producing electricity by this system.
The text has been automatically translated from Portuguese into English, atravéz the Google Translator. It may be that some words slipped out of context.
If there is anyone who wants to contact me to comment on the project, my email is [email protected]