1/4" Square to 1/2" Socket adapter

I created this for a project to eliminate needing to purchase and use multiple socket adapters.

My use for this was to attach a low scale inch pound torque wrench with 1/4" square drive to a large socket needed for a yoke nut. This will allow me to set bearing preload (less than 10 in/lbs) with a more convienent tool setup than a stack of adapters.

I stress tested one, it stripped the 1/4" square hole at 50 in/lbs. Definately not for use with any solid torque. For setting resistance of a moving part, it should be adequate.