Summary

This is a shorter fork for Yet Another Filament Spool by ffleurey that will fit the 1lb loose spools from Ultimaker.

Instructions

Print the top and bottom hub pieces from the ffleurey's thing, along with three of the shorter forks. Assemble with M3 screws and nuts. If you are using a loose spool, you can put the forks around the spool and pop them into the bottom hub piece without rewinding the spool.

Note: The center hole in the hub piece from Yet Another Filament Spool fits perfectly on the Rostock Max Spool Rod & Clip by Av8rRC

Shorter Fork for Yet Another Filament Spool