Cradle for Losmandy Gemini II hand controler

This is a cradle for the Losmandy Gemini 2 hand controler. It clips onto a leg of a Losmandy G-11 tripod (or any other mount with 76 mm / 3 inch diameter legs).

The V3 model has extra space between the cradle and the clip to allow your fingers to use the buttons on the back of the Gemini 2 controller while in the cradle. Also the clip arms are slightly longer, thicker and shaped to have a preload on the tripod leg to give a more secure grip. More of the front and bottom of the cradle have been removed as this material was not really necessary and to reduce coil cable interference. I printed on 70% infill and the clip grip is very good.