Summary

These are 12cm "grooved" wand segments for use with build-a-wand. They are five-lobed with and without a 22.5 degrees/section twist.

Instructions

Load desired objects and print. These are all intermediate (except for one twisted base object) so you will likely want to print a final from another build-a-wand thing.

The twisted segments are numbered (x1, x2, x3, ... x8) for the order they should be used in. x2 is plugged onto the top of x1, x3 onto the top of x3, and so on. The proper orientation for plugging is as loaded.

These were all printed without rafts or supports. If you experience problems with these tall segments tipping during print then use a raft.

Build-a-Wand Twisted Grooves