Prusa i3 Build Plate

This is an optimized version of the i3 build plate with all items set to 0 so no items "float" Also i have made it so that the parts are all upright taking up less space so that it does not take up the entire heatbed. This will print on a 200x200 platform and includes all the printed parts of an i3. The gcode file i have included is to print this in ABS and it is setup for the following settings,

Material: ABS
Extrusion Temp: 238c
Filament size: 1.75
Layer Height: .28
Nozzle diameter: .35
Added a z-lift to it so that it prints nicely.
Skin thickness: 4mm
Speeds: loops-90mm/s, solid-120mm/s, sparse-120mm/s,
travel-100mms

It takes about 18 hours to print this. I also removed the skirt on this because it would print off the glass. just remember to prime before you print.

This is the version found here: http://reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3

I guess it is the box style.