Moai head
The model is split in 4 pieces and printer on a Standard Prusa i3 from 3dprinterlab.org
The model is 250 250 200 mm and weighs 8.5 Kg
The model is filled with plaster, glued and coated with epoxy. After sanding a few coats of base coat.
In have 3 different models now:
hammer effect gold paint
white paint
- special paint marble effect
Slicered with no infill, 4 perm's, 0.4 nozzle, 0.32 layer
This model is derived from:
https://www.myminifactory.com/object/moai-head-on-easter-island-2025