Summary

The original Pop Pop boat was made for 5mm straws. Unfortunately, I didn't have any of those. I widened the straw holes to be 6mm, which fit the party straws that I was able to buy.

The only files changed here are in the "engine" file. The "hull" is exactly the same as in the original project, it's only listed here for completeness.

Print Settings

Printer Brand:

LulzBot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>TAZ 5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>5%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The hull doesn't need anything special.</p><p>For the "engine", I found that Archimedean Chords infill (as found in Slic3r) worked extremely well.</p><p>ABS is recommended, since this (and the original) design require a bit of flex to the hull in order to snap in the engine.</p></div>

3D Printed Pop Pop Boat (6mm straw holes)