Ball mount 20mm

This is a ball joint to mount a flat object with one screw. The ball is on the screw, and the socket can rotate or tilt freely around the ball.

Assembly requires

• 4 screws, M5x20 for the plates
• 4 nuts, M5 to sink in the bottom plate.
• 1 screw, M5x30 or longer through the ball.
• 1 nut M5 or the plastic tube to counter the long screw on the ball.

• doublesided adhesive tape (or other glue) to mount a mirror or whatever object you want to mount.

• Flat or hex screwdriver, matching the screws you use.

The 4 screws in the plate squeze on the ball. Use them to adjust the force that is needed to move the joint. Insert spacers between the plates, if you want a very loose joint.