Summary

The REAL! STL versions of the Chaos Orbs. This way you can use them in a larger range or printer applications and take to other website. Sorry for the difficulty so far.
~George

Print Settings

Printer Brand:

Printrbot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Simple Black</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>All PrintrBot prints were done with 3 shells and varying speeds from 30 mm/sec to 100 mm/sec. I would not recommend going over 50 mm/sec, as some extrusion problems occurred. I used a heated bed at a temperature between 60 &amp; 70 degrees Celsius. Extruder temperature was at 205 degrees Celsius. All prints were printed with a raft and support. Support should be used for the underside and the ears. The nose prints well without support. Prints were cleaned off using a sharp blade and a blunt chisel.</p></div>

How I Designed This

Chaos Orbs STL Version (Really!)