Project: A0-TAZ - Lulzbot TAZ Style X Ends for A0-10x Printers

This project adds anti-backlash and anti-wobble similar to that found on the Lulzbot TAZ printer to the older Lulzbot A0-10x designs. It will also likely fit some Mendelmax 1.5+-ish Derivatives. With the addition of a second Acme nut, a metal spring, and the printed parts above, you should be able to eliminate any remaining wobble from your Ao-10x style printer. Please note that you will need to ensure you have clearance for the Ao-101 style Lower X end clamp if you are upgrading an older machine. Development thread is here: http://forum.lulzbot.com/viewtopic.php?f=16&t=306