Summary

An above the TV DVD mount. This is a 39" TV, but it should work on others if they have 200mm bolt spacing. This keeps it out of the way if you don't want something sticking out at the bottom.

Instructions

I printed this in ABS, but PLA should be fine as well and possibly more rigid. I put Velcro on the bottom of the shelf (the fuzzy side), and it rests on top of the TV. I Velcroed the DVD player to the shelf so it cannot be knocked off. The DVD feet do grab good, but I think it is safer to Velcro it down.
I used a 6mm socket head bolt, washer, star washer, and nut to fasten the shelf to the legs. I also needed a slightly longer 6mm bolt for the mounting to the TV (the ones I had for my mount were a bit too short with the added bracket.
The star washer was used in between the shelf and legs to help lock it where you snug down the bolt. I did leave a tiny gap in the design to account for this. About .5mm on each side. There is enough flex in the ABS, that you could leave it out if you wanted, especially if resting it on the TV like I did.
Layer height = .3
Perimeters = 2
Top solid layers = 3
Bottom solid layers = 3
Fill density = .35

DVD, Cable Box, DVR, Above TV Adjustable Angle Shelf VESA 200mm Flat Panel HDTV