Summary

Made a measuringclock holder but that you can keep constantly on your 3d printer. I made this for my limit measuringclock.
Its diamater for the measuringclock is 54,2 cm
I also included the files for sketchup so you can change the holes etc if you like. If you chance it and put it on thingiverse use my name please thank you!

Instructions

To make this you wil need:
2x M5x60 (with nuts)
4x M5x15 (with nuts)
1x M5 threath tapping
1x M3 threath tapping
1x 5,5 drill

Instructions:
Print all the 5 pieces
remove the plastic piece with the screw thats on the microswitch.
remove the 2 screw thats hold the plastic between the 2 metal plates (the 2 on the bottem)
go with the 5,5 drill through the 2 holes at the bottem of the metal plate and the plastic inbetween ( they need to be bigger if you use m5x60)
put the holder frame on it ( its possible you need to file it a little but it need to be tight)
put the screws in and the nuts on it and tighten.
use the m5 threath tapping on the 4 holes of the holder frame and on the 4 holes of the holder for the measuring clock
put the measuring clock between the holderframe and screw in the 4 m5 bolts and secure with nuts.
mount the block_measuringclock and put in the spacer for the microswitch and your done!

Measuringclock holder at the side for K8200