EE Electrical Breadboard Cabinet Stackable Case - Parts - UPDATED Control Panel and Cabinet Wall Support

I have seen an assortment of Breadboards, Blocks, Cases, etc.
I have not yet found something that I found useful enough to be comfortable with, besides the Foldable Breadboard / Arduino Cases - which I also designed & printed my own versions of.

This seemed to fulfill the needs that I commonly look for:

• Mounted Breadboard
• Control Panel for Mounting Parts
• Spare Parts Case - the Drawers

This Control Panel is setup for mounting:

• LEDs
• Switches
• Potentiometers

Assembly requires the: BreadboardTrayFloor , 2 Drawers , 2 StdCtr Parts , 2 StdSide Parts , 1 CntlPnl - and GlueGun suggested.
The 2 StdSide Parts are glued under the sides of the Tray - as side Legs.
The Drawers are individually temporarily slid in to adjust and glue in the StdCtr Parts, in the center bottom of the Tray - as Center Legs.
The CntlPnl is glued onto the rear of the Tray.
When dry, the Drawers can then be slid back in.

For the TENTACLE PROBES , see:

• 1711909 - EE Electrical Tentacle Probes - for EE and Arduino Cabinet

Also these are Stackable.
To stack them, you can either mount the StackLegs on the Board sides individually, or buil a Cabinet to slide the Tray-Drawer Boards in.

To create a shelf, mount the multiple StackLegs vertically to desired height , then horizontally via a bottom shelf with the SupportFloorWall Part and in the rear with another SupportFloorWall Part.
Then slide the Boards into the Shelves.

Hope this is useful !