SNES Zero

This is my first 3d print project :).

It uses a raspberry pi zero, running retropie.

Most of the inspiration for this came from Adafruit's PiGRRL and
Sudomod's Game Boy Zero. While designing this, I wanted to keep the look and feel of the classic SNES controller.

My google photo album with all the pics while designing/building it.
https://goo.gl/photos/DuyE2tGNVcjDhsfM6

parts:

• Raspberry Pi Zero
• 3.5in tft screen
• 10 x 6mm tactile switches
• 2 x 12mm tactile switches
• adafruit PowerBoost 1000c
• Lithium Ion Polymer Battery - 3.7v 2500mAh
• Adafruit Mono 2.5W Class D Audio Amplifier
• 8 ohm speaker
• IOGEAR 4-Port USB 2.0 Hub
• Panel Slide Switch
• 50k ohm Wheel Potentiometer 16 x 2mm
• 5-Pin Stereo 3.5mm Socket Audio Connector
• PCB Boards
• audio filter: 10uF cap, .033uF cap, 150 ohm resistor, 270 ohm resistor
• case screws: 2 x #4 -40 x 3/4" screw & nut
• buttons screws: 6 x #2 -56 x 3/8" screw & nut

UPDATE(12/18/16): Just uploaded new buttons and dpad with chamfered edges. The first versions hurt my fingers after playing for a while.