Summary

RepRap Mendel variant using two sheets at right angles for the frame.

This is an early version, please see https://github.com/nophead/Mendel90 for the latest version.

Instructions

See http://hydraraptor.blogspot.com/2011/12/mendel90.html

This is the 8mm rod version with NEMA17 motors, T5 belts and an acrylic frame. The latest version uses an aluminium composite DiBond frame and is available as a full kit.

The source files and STLs for this and other sizes are on Github here: https://github.com/nophead/Mendel90. There are also bills of materials for each sub assembly, so you can see which parts go where.

Instructions for this version are in the RepRap wiki. The DiBond version has a detailed build manual here: https://github.com/nophead/Mendel90/blob/master/dibond/manual/Mendel90_Dibond.pdf

The base sheet is designed to be 10mm acrylic and the rest of the frame 6mm.

Print:

10 fixing-block.stl

2 z-screw_pointer.stl

4 z-coupling.stl

2 pulley.stl

and one of all the other STL files.

Vitamins.txt lists all the other mechanical parts.