Summary

Kitchen towel ring.

Instructions

EDIT: Added a small Test file to quickly print a piece of the bracket. Use that to test the fit on a cabinet.

This towel ring fits a buyer-assembled Mainstays Kitchen Island Cart, but it should fit a lot of other flush-mount cabinet doors if there's adequate gap above the door.

The bracket is a close fit on a door which is 0.7" (~17.5mm) thick, with an upper gap of 0.15" (~4mm) but might be adjusted with design software, such as Blender, or if the print software allows it XYZ scaliing might adjust the fit.

Printing:
Almost nothing touches the build platform so there's no need for a raft. And little strength is required so minimum fill is ok. I got adequate print quality with 0.30mm layers and average speed.
60 minutes, 30grams ABS.

Free the ring with a thin blade or tool.

[edit 8-2018; These earlier projects lacked Metric files. At the time, I was unaware that some software could not determine the actual size if a project was designed in inches. If your software imports an impossibly tiny file, just scale it up XY+Z by a factor of 25.4. (There are 25.4 millimeters to the inch.)

Towel Ring for flush doors