Summary

Well, this is just a motion toy to play with intermeshing gears.

Print Settings

Printer:

Prusa i3 MK2

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>If you want the "clicker" (it just clicks when spinning the gears) you will need:<br>backplane-clickmount.stl<br>clicker.stl<br>clicker-base.stl</p><p>For no clicker mount use backplane.stl and omit the clicker*.stl files.</p></div>

Post-Printing

"Vitamins"

            <div><p>You will need 7 bearings size 8x22x7 (608-ZZ) and one 8x16x(whatever you can get, max 7mm), plus a 3x7x3 for the clicker.</p><p>You will also need 6 SPAX screws 3.5x15, plus 3 sawed-off ones for the clicker plate.</p></div>                <p class="detail-title"><strong>Clicker</strong></p>            <div><p>The clicker is tricky. You need three screws 3.5x12, but you will have to remove them after initial assembly and saw-off the tips, so that they don't protrude through the backplane.<br>FIRST mount the clicker-base on the baseplate, THEN put the clicker on (insert the small bearing into the clicker first).<br>Finally attach a small pulling spring as in the photo.</p></div>

Gear toy - meshing gears