Summary

All I did was design this bulb assembly for the Aviation Inspired Lamp. I have included pictures so that it can be viewed as components are assembled.

Print Settings

Printer:

MakerFront i3Pro

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Using CURA: FOR LED HOLDER ONLY<br>Layer Height: 0.2<br>Shell Thickness: 1<br>Enable Retraction: YES<br>-Retraction Speed: 40.0mm/s<br>-Distance: 4.5mm<br>Bottom/Top Thickness: 0.6mm<br>Fill Density: 25%<br>Print Speed: 40mm/s<br>Printing Temperature: 230C for CLEAR PLA<br>Bed Temperature: 70C<br>Support Type: NONE<br>Platform Adhesion: BRIM<br>Flow: 103.0%<br>UNDER EXPERT SETTINGS:<br>Solid Infill Top: YES<br>Solid Infill Bottom: YES<br>Fix Horrible:<br>-Combine Everything Type-A: YES<br>-Combine Everything Type-B: NO<br>-Keep Open Faces: NO<br>-Extensive Stitching: NO</p><p>Using CURA: FOR COVER ONLY<br>Layer Height: 0.1<br>Shell Thickness: 1<br>Enable Retraction: YES<br>-Retraction Speed: 40.0mm/s<br>-Distance: 4.5mm<br>Bottom/Top Thickness: 0.6mm<br>Fill Density: 0%<br>Print Speed: 40mm/s<br>Printing Temperature: 230C for CLEAR PLA<br>Bed Temperature: 70C<br>Support Type: NONE<br>Platform Adhesion: BRIM<br>Flow: 103.0%<br>UNDER EXPERT SETTINGS:<br>Solid Infill Top: YES<br>Solid Infill Bottom: NO<br>Fix Horrible:<br>-Combine Everything Type-A: NO<br>-Combine Everything Type-B: YES<br>-Keep Open Faces: NO<br>-Extensive Stitching: NO</p></div>

20MM STAR LED BULB ASSEMBLY