Overview and Background

Instructions and requirements

Version 1 (doesn't require a 3D printed tapping kit)

The DVSLower.stl and DVSUpper.stl case are designed to be used to together.

Requires:
2 x M3 nut
2 x M3 screw (10mm - 15mm in length)

Instructions:
1) 3D print DVSLower.stl and DVSUpper.stl
2) Place the DVSLower on the bottom of the DAVIS.
3) Place the M3 nuts into the hexagon holes in the DVSLower component.
4) Slide the DVSUpper over the top of the DAVIS and the DVSLower.
5) Insert the M3 screws on either side of the DVSUpper component.
6) Tighten the screws until the screws are secure.

Version 2 (requires 3D printed tapping kit, this version allows the screws to be inserted more securely without the scare of losing the M3 nuts)

The DVSLowerThreaded.stl and DVSUpper.stl case are designed to be used to together.

requires
2 x M3 screws (10mm - 15mm)
3D printing tapping kit (M3)
2 x M3 threaded inserts

Instructions:
1) 3D print DVSLowerThreaded.stl and DVSUpper.stl
2) Use the tapping kit to tap the two holes on the left and right hand sides of the DVSLowerThreaded component.
3) Ensure that a M3 screw can be screwed into the tapped holes, if not, repeat Step 2.
2) Place the DVSLowerThreaded on the bottom of the DAVIS.
4) Slide the DVSUpper over the top of the DAVIS and the DVSLowerThreaded.
5) Insert the M3 screws on either side of the DVSUpper component.
6) Tighten the screws until the screws are secure.

Lesson Plan and Activity

N/A

Materials Needed

The DVSLower.stl requires:
2 x M3 screws (10mm - 15mm)
2 x M3 nuts

The DVSLowerThreaded.stl requires:
2 x M3 screws (10mm - 15mm)
3D printing tapping kit (M3)
2 x M3 threaded inserts

DAVIS casing