Summary

My attempt for an eclosure

Instructions

Part list

2 square meter polystyrene

? 3 mm bolts 12 mm long

? 3 mm bolts 16 mm long

? 3 mm spacers

? 3 mm nuts

? Chassis fasteners

2 bottom corners

2 bottom corners

2 front connectors

3 front connectors

3 top corners

6 saddles in 2 sizes

? 10 cm corners

Chassis elongation

A lot of patience

The general idea is that the bottom plate lies on the fixed nuts of the 4 feet.

Be careful that no bolts can hit this plate!

Also check how far the printbed goes over the front and back of the chassis to prevent that it hits the enclosure during printing.

I decided to stay as close as possible to the chassis.

Wish list:

A proper chassis elongation