Summary

這是gogoro電動車的造型面板用的小小兵眼鏡單眼版。
組裝參考影片：https://www.youtube.com/watch?v=_LEnrK0eYzs
製作記錄：http://philgogoro.blogspot.tw/2016/10/3dgogoro.html

This is a cosplay equipment for Gogoro EV scooter.
Assembly reference: https://www.youtube.com/watch?v=_LEnrK0eYzs
Design Log: http://philgogoro.blogspot.tw/2016/10/3dgogoro.html (in Chinese with photos)

Print Settings

Printer:

D-force V2 300

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The widest part measurement is about 23cm, make sure your printable area fit.<br>It will take 50~60 hours to print all parts using 0.2mm resolution..<br>Soft material is recommended for rubber parts, or you can cut from any rubber strip on hand.<br>You have to tap the screw thread  8mmx1.25 for precision consideration.<br>Stainless 8mmx1.25 14mm screws are recommended for strength consideration, you will need 8 of them.<br>Print 2 Belt pins for goggle nylon belt no wider than 4cm with maximum thickness 3mm.<br>2 bolts thru the EV front panel are strongly recommended for safety consideration if you will ride with it.</p></div>

Goggle for Gogoro EV panel