COB LED close up lens hood for Nikon (HB-32 67mm) lens

Nikon lens hood (HB-32) 80mm COB LED Bracket.

This is a marge of a 80mm COB LED angel eye ring used in automobiles and a bits from pair of thingiverse parts.
I used the mounting ring from the filter holder and shade from the Tamron hood and blended them to create a mounting bracket for the LED ring.

COB (Circuit on board) LED angel eye ring can be found online through most online bidding site, diy car part shops or far east whole sellers(that where i got mine from, super cheap)
** make sure you get perpetrate LED drivers. in most cases they will supply them for installation into cars

other bits you'll need:
1x-12v DC battery pack (again far east re-sellers)
https://www.google.co.uk/search?q=12v+battery+pack
2x -power lead connectors (on my 12v battery they were 2.1mm jacks)
https://www.google.co.uk/search?q=DC+Power+Supply+Jack+DC+Power+in+line+socket
1x-curled 2 lead power cable (mine started it life as cigarette lighter extension lead. found car boot sale, but can be found most hardware stores.)
https://www.google.co.uk/search?q=cigarette+lighter+extension+lead
2x 5mm wide Velcro roll (or get only the 20mm below and cut it length wise to get the 5mm wide and 200mm long)
1x 20mm wide Velcro roll (don't worry you will find a use for the rest of the roll)
https://www.google.co.uk/search?q=20MM+VELCRO
1x 1/4 D Ring Screw tripod screw.
https://www.google.co.uk/search?q=1%2F4%22+D-Ring+Screw

this is still a work in progress and further adjustments i make will get uploaded.

All the best, Dave