Summary

This project is a reproduction of an original 1940's hat block scanned and edited for optimal printing. More information and images at http://athenewright.com/index.php/3d-printed-block/

Print Settings

Infill:

20%

                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed using ABS Plastic. Other plastics can be used provided that the melting point of the plastic is accounted for when blocking in felt. </p></div>

Post-Printing

Post Printing Steps

            <div><p>Note: The block in the following images is printed in two colors. This was a product of using the ends of two spools and is not a necessary part of the project. </p></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/a8/3f/c1/29/7a/IMG_2864.JPG"></p>            <p class="detail-caption"><strong>1. Build a pinnable base to facilitate blocking. For best results create a two layer base with one section fitting into the depression at the bottom of the block and the second, the same size as the full bottom of the block. Particle board not recommended due to its tendency to split when nailed. </strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/12/76/1d/eb/b5/IMG_2866.JPG"></p>            <p class="detail-caption"><strong>2. Glue wooden pieces together and allow to dry.</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/48/04/30/93/5b/IMG_2868.JPG"></p>            <p class="detail-caption"><strong>  3. Adhere the wooden base to the printed block </strong></p>

Pointed Crown Hat Block