Summary

Want to make your own Blade Trigger for the CS1/160R? Here you go!
Print Settings

Printer:
MakerGear M2
                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30% +</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Tools:</p><p>Drill</p><p>Helicoil Installation Tool<br><a rel="nofollow" href="https://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW">https://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW</a></p><p>Helicoil<br>Stainless Steel Helical Insert, M2.5 x 0.45 Thread, 2.5 mm Long<br>91732A764</p><p>Instructions:</p><p>Print the file using 1mm supports<br></p><p>Remove supports from the back of the trigger andthrough all the holes.<br></p><p>Print using the proper settings for your printer and material.<br>Finishing may be accomplished by sanding, Acetone Vapor Bath, or whatever method is required for the material being used.</p><p>Use the drill from the helicoil installation kit to drill out all 3 holes in the trigger.</p><p>Use the tap from the kit to tap the center hole.<br></p><p>Install the helicoil per the kit instructions.  </p><p>Install the trigger on your CS1/160R.  Enjoy!</p></div>
CS1/Gtek 160R Blade Trigger
