Summary

This is a robot arm which is driven by servos and controlled via an arduino board.

Have a lock at the robot arm working as a business card dispenser:
http://youtu.be/wh9E098Zt5k
Watch the basic joint move:
http://youtu.be/bu_qJ_hEIAg
and the basement turn:
http://youtu.be/1W78memrASw

!!! ATTENTION - WORK IN PROGRESS !!!

Instructions

All you need to build this robot arm:

Print every part once, except "joint"- you need two of them.

3x servos (I used "Corona DS558HV" - these are quite strong)
6x ball bearings "67002RS" (10 x 15 x 4 mm)
12x M3 x 15 mm
4 pieces of 8mm aluminum pipe (there you can place the wires)

Power-supply, wires and a arduino board ;-)

UPDATE 24th Jan 2014:
There are now two version of the part "joint":

the normal one which works fine and has a minimal gap within the arm an soulder joint
the "large" version, which provides enough space for a bunch of cables leading into the aluminum pipes.

There are also two new versions of the parts "turn table" and "base counter". The original version is the compact one, version two provides more room for rotations movements. Be aware, that you can't mix parts of different versions.

Robot Arm