Summary

Holds the external components for an RFID reader in a fairly weather resistant case. This is my first upload.

Instructions

Scale the print so that your RFID board will fit inside the space between the two halves. Screw the back plate to the wall. Screw your RFID reader to the plate. Drill a hole through the wall in the provided hole and run the wires to the RFID reader. Wire it up. Make sure it works now. I'd coat any exposed electical wires with some brush on electrical sealant to keep it from corroding. Put a small bead of gorilla glue around the perimeter of the case, snap two halves together. Let glue set up and case should be fairly weather resistant.

External RFID Reader Case