Summary

This is a replacement PCB clip used to secure the main board in an Allied Leisure cocktail pinball machine. It was made to replace a broken one in an EROS ONE machine from 1979 but should work in most of the cocktail pinball machines made by Allied Leisure (ALI)

Print Settings

Printer Brand:

FlashForge

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>FlashForge Creator Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>35% or greater</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed these in ABS on glass with 4 shells.  The finished clip seems stronger than the original.  With the heat that can be generated inside some of the pinball machines I would NOT recommend PLA material for this.</p></div>

Post-Printing

You may need to run a drill through the hole to ensure the mounting screw will fit but otherwise the part should require very little cleanup.

ALI PCB clip