Overview and Background

Another spinner fidget!

I ordered a bunch of bearings to print out some existing fidgets I've seen on here, but I ended up ordering the wrong sized one, along with the proper size ones..

The regular sized bearings are 22mm wide, while the smaller "wrong sized" ones are 11mm. I decided to use them somehow, so I quickly came up with a simple design, and it came out pretty decent.

Prints flat on the base, with a slope on top to accommodate for the shorter bearings.

The holes are .1mm wider so the bearing snap in easily while staying nice and snug.

You'll need 5 11mm (wide) x 4mm (high) bearings, and 1 22m (wide) x 7mm (high) brearing.
The latter are the "common" skate bearing, and the former are plentiful online.

Enjoy!

Lesson Plan and Activity

Can be used as a fidget

Spinner fidget