Summary

my girlfriend finally got her first danbo to do some photography.
of course i dropped it and broke its leg...

long story short, here you are:
a replacement for the joints/hinges to connect the legs, arms and the head to the body.

read the instructions carefully

PS: i chose the license on purpose. you are NOT allowed to sell this print

Print Settings

Printer:

geeetech prusa i3 pro c

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,2mm Layer hight</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>i've uploaded three different models to fit the different tolerances of the printers out there:</p><ul><li>0,0mm tolerance between the hole and the pin</li><li>0,2mm tolerance</li><li>0,4mm tolerance</li></ul><p>each bundle includes...</p><ul><li>1x female connector (hole)</li><li>1x male connector (pin) horizontally oriented</li><li>1x male connector (pin) laying upright to increase strengh</li><li>the necessary supports - so DO NOT add additional structures</li></ul><p>settings:</p><ul><li>PLA</li><li>185°C (first layer: 190°C)</li><li>bed: 50°C (first layer: 60°C)</li><li>100% infill</li><li>brim recommenced if you suffer from insufficient bed adhesion</li></ul></div>

Post-Printing

1) CAREFULLY remove the supports with a knife
2) measure the thickness of the pins: something between 2,9-3,2mm is fine
3) cut away too much plastic carefully
4) GENTLY put the pins into the danbo
5) repeat 2)-4)
6) enjoy :-)

Danbo Leg,Arm,Neck joint/hinge replacement