Summary

Spinny fidget thing that snaps together. Center button is a slightly modified version of the spinner_pin_notch found here http://www.thingiverse.com/thing:2108748 Snaps together well. Not perfect but I am leaving it the way it is.

Print Settings

Printer:

DIY Kit

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>n/a</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>have not tried this at anything over 0.1 mm so it may not work. PLA seems to work so far.</p></div>

Post-Printing

Need 6 nuts that are 1/2 inch wide. Press fit everything together. There is a little slop in it that I am still working on but this came out alright.

Add nuts then push ring into place

Press other piece on. I sandwiched it between my hands and squeezed. It popped into place.

Press bearing in. I use an old 15 mm socket. A bench vise helps here.

Spinner with enclosed weights