Summary

For more information visit - http://goo.gl/16euPi
Facebook - https://www.facebook.com/Proto3000
Google+ - https://plus.google.com/+Proto3000/posts

Proto3000's 3D Printed Snow Globe is here. Feel free to download and customize the snow globe to your liking. If you'd like to see how we did it, visit: http://www.youtube.com/watch?v=90Kl7kMS6Fs

Our snow globe was created using a combination of applications including: Polyjet, FDM, and Makerbot technologies.

Instructions

We started by designing the components of the snowglobe using Solidworks CAD software and designed the globe with threads to securely screw the lid to the base.

The next step was to send the files to print. We used different additive processes for the prints to showcase the synergy that the technologies have with one another, and the different material properties that can be achieved. VeroClear to create the clear glass-like globe. VeroWhite for the base too add strength while remaining waterproof, and the Snowman itself was printed on a makerbot using PLA plastic for speed and finishing.

Once the prints were complete, some finishing is required. support material is washed away using a water jet, and brushes for finer details. The globe is then sanded down and clear coated to create transparency. The snowman was simply spray painted white, and the eyes and nose were hand painted. After clearcoating, the parts are ready to go.

Once the printed parts have been finished, the last step is the assembly. The Snowman is glued to the base, a small amount of epoxy is applied to the threads, and the globe is screwed into the base. through a small hole in the bottom, the globe is filled with water and then plugged to seal the water in.

There you have it, a 3D printed snowglobe.