x-axle cruising cam Leapfrog Creatr

I made a cruising cam for the creator out of a Logitech C270.
Parts you need:
Logitech C270
4 screws M3 (or any equal in inch/zoll)
tap drill
solder unit (to put the Cam apart)

While printing the parts you can follow this guide to get the cam out of its housing. http://hci.rwth-aachen.de/fabscancamera

Keep two of the little black screws from the cam (the longer ones) you will need them for the CamHolderBox.

You need to rotate the picture of the cam by 90 degree, of course.

Please check the distance between the camera and the printer bed there is only little space in between.

Enjoy watching your prints growing ;-)