DIY E-Bike with EXT600 & Turnigy Aerodrive SK3 - 6374-192kv

Turnigy Aerodrive SK3 - 6374-192kv motor mount for my EXT600 Bicycle.

Maybe used with bikes that also have a 32mm strutting for the mounting piece and enough space for the motor.

Project is not completely finished yet, but I still wanted to share my Designs.

• The two side mounting pieces also have recesses for ball bearings.

  • Piece I = 22 mm x 7 mm (for 8mm shaft) [https://goo.gl/78cJHU]
  • Piece II = 30 mm x 9 mm (for 10mm shaft) [https://goo.gl/HBEofb]

• All mounting bolts are M10 bolts, though I dont have the exact lenghs.

• Turnigy Aerodrive SK3 - 6374-192kv with 2,7kW power should be more than enough to go 50km/h uphill [https://goo.gl/bPbneD]

• The four motor mount screws are M4x20

I will be powering my setup with a 6S 20AH LiPo and a 100A ESC with an Arduino and throttle grip.

NOTE: You need to split the "ebike holder.stl" into two pieces!