HTC Vive power cord cover

No supports. print with vive logo facing down on the build plate.
Just standard PLA nothing special. just use your favorite settings. I would recommend at least 45% infill. This is cosmetic only and has no stress so form over function.

HTC Vive power cord and adapter cover.

Tired of looking at your black adapter?
Tired of all that extra cord showing?
Do you have white faceplates and wonder why the adapter and lighthouses are black?
Well I designed this cover because I only needed approx. 1 foot of cord showing of the generous cord they give you.
with this cover you can leave as much cord or as little showing as you need. cleans up the wiring a little bit.

Use 1 peg or 2 pegs or no pegs to secure your cord. they should press fit right in. The less cord you have inside the more likely you are to need more pegs. the 2 pegs don't need to be printed. in cura add the item. right click on one of the 3 items. Choose split object into parts. Then delete both pegs or one peg depending on if you want them or not. you probably can get away with no pegs as the cord will probably stay inserted without them.

Downside that I can see. after the part is printed and the adapter is inserted and you roll up 90% of the cord its a bit heavy but so far stays plugged in.

any suggestions? let me know....or remix and fix yourself and upload!