Summary

I needed a cold shoe to mount a viewfinder to a custom Instax camera so I drew one up. Hopefully this can help someone else as well. The holes are 1 mm in diameter with a 2mm diameter countersink. The opening is 19mm across and 2mm high.

Print Settings

Printer:

Maker Select V2

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>This can be printed at 0.2mm as well with a lower infill, but since it was such a small part I choose 100% infill. I also rotated the model so that the cold shoe printed vertical to reduce overhangs.</p></div>

Cold Shoe